Grundläggning

Visar alla 22 resultat

  • CH Line (2)

    CH Line
  • MC Line (15)

    MC Line
  • Övrigt (5)

    Övrigt
  • Ladda ner PDF

    CH 450

    The CH 450 is equipped with the CCS (Comacchio Controlling System) on 12’ full touch screen for monitoring and control of the rig performances and operating parameters.

    Ladda ner PDF
  • Ladda ner PDF

    CH 650

    The CH 650 is equipped with the CCS (Comacchio Controlling System) on 12’ full touch screen for monitoring and control of the rig performances and operating parameters.

    Ladda ner PDF
  • Ladda ner PDF

    CPH

    The CPH is a Casing & Pipe Handling Unit mountable on excavators. The CPH is available in different versions, depending on the clamping range, each of them can be fitted with two or three clamps. The CPH can be supplied separately or together with an excavator designed specifically for this application.

    Ladda ner PDF
  • Ladda ner PDF

    MC 10

    The MC 10 is the latest addition to the Comacchio line-up of drill rigs for vertical applications, a 10t class rig featuring an 8000 daN mast with simplified articulation. The machine can be supplied with alternative rotary heads for open hole rotary and rotary-percussive drilling methods. Thanks to the modular mast construction the rig can be operated both in low-headroom and in open-site conditions.The first unit was delivered in the “F-Line configuration”, designed for concrete injection operations (mini piles) using solid stem and continuous flight augers (CFA). This configuration comprises a high torque rotary head offering 3.000 daNm torque fitted with a 4” swivel. The mast was equipped with new a hydraulic casing clamp that was developed to allow the use of 660 mm casings or 600mm-diameter augers. With this further addition, the F-Line has been expanded with an intermediate unit that sits between the MC 6-F and MC 13-F, ideally suited to handle diameters ranging from 400 to 600 mm.

    Ladda ner PDF
  • Ladda ner PDF

    MC 12

    The MC 12 is a versatile and powerful hydraulic drilling rig designed for civil engineering works such as micropiles, anchors, jet grouting and ground improvement in general. The rig’s patented mast articulation ability, compact size and variety of mast positions and inclinations allow for operation even in confined spaces.

    Ladda ner PDF
  • Ladda ner PDF

    MC 14

    Born in 2008, the MC 14 is a high performance hydraulic drilling rig designed for civil engineering works such as micropiles, anchors and general ground improvements. In 2021 the rig has gone through a ground up redevelopment process based on the introduction of a new patented undercarriage. The new MC 14 features an innovative undercarriage offering enhanced stability and manoeuvrability on uneven ground while keeping the rigs width within a minimum of 1800 mm.  The rig’s mast articulation ability, compact size and variety of mast positions and inclinations allow for operation even in confined spaces. The powerful engine allows for the installation of a wide range of drill heads and accessories. The result is that the MC 14 can perform a wide range of drilling technologies, with a special focus on double head drilling (both in rotary/rotary mode and rotary/rotary‐percussion mode). The enhanced stability and mobility required while operating with such heavy drilling systems is achieved through the new patented undercarriage, making the MC 14 ideally suited for demanding anchoring and slope stabilization projects in unstable ground conditions. The standard features of the MC 14 include the innovative Comacchio radio control system, which can electronically manage all functions. Like all Comacchio rigs, the MC 14 can be customized according to the specific needs of the customer.

    Ladda ner PDF
  • Ladda ner PDF

    MC 15

    The MC 15 is a compact high-performance drilling rig designed for civil engineering works such as micropiles, anchors, jet grouting and consolidations in general. A distinctive feature of the MC 15 is the variety of movements and inclinations that it can perform thanks to its patented mast articulation, allowing it to be used even in confined or low overhead spaces. Equipped with advanced modular hydraulic circuits, the MC 15 can accommodate a wide range of rotary heads, hydraulic drifters, double head systems, water and mud pumps, winches and rod carousels and is suitable for rotary and rotary-percussive drilling. This machine can be equipped with hydraulic proportional servo-assisted controls or with radio control. Like all Comacchio rigs, the MC 15 can be customized according to specific needs.

    Ladda ner PDF
  • Ladda ner PDF

    MC 15 P

    Based on the concept of the MC 15, the MC 15 P offers higher performance thanks to the superior motorization capable of delivering up to 168 kW (225 HP) of power. The MC 15 P is a "multipurpose" machine that can carry out any type of foundation and soil consolidation drilling project, from micro-piles to jet grouting, as well as anchors and soil nailing. A distinctive feature of the MC 15 P is the variety of movements and inclination angles of the mast that this rig can reach. The machine can mount a wide selection of rotary heads, hydraulic hammers, water and mud pumps, winches and loaders for drilling rods. The fully flexible design lends itself to a wide range of drilling processes using rotary and rotary/percussion techniques. The increased performance of the engine makes it particularly suitable for the use of drilling techniques with double-head systems.

    Ladda ner PDF
  • Ladda ner PDF

    MC 20

    Based on the concept of the MC 15, the MC 15 P offers higher performance thanks to the superior motorization capable of delivering up to 168 kW (225 HP) of power. The MC 15 P is a "multipurpose" machine that can carry out any type of foundation and soil consolidation drilling project, from micro-piles to jet grouting, as well as anchors and soil nailing. A distinctive feature of the MC 15 P is the variety of movements and inclination angles of the mast that this rig can reach. The machine can mount a wide selection of rotary heads, hydraulic hammers, water and mud pumps, winches and loaders for drilling rods. The fully flexible design lends itself to a wide range of drilling processes using rotary and rotary/percussion techniques. The increased performance of the engine makes it particularly suitable for the use of drilling techniques with double-head systems.

    Ladda ner PDF
  • Ladda ner PDF

    MC 21

    Ladda ner PDF
  • Ladda ner PDF

    MC 22 A

    Ladda ner PDF
  • Ladda ner PDF

    MC 24

    Ladda ner PDF
  • Ladda ner PDF

    MC 28

    Ladda ner PDF
  • Ladda ner PDF

    MC 30

    The MC 30 is a high performance hydraulic drilling rig designed for civil engineering works such as micropiles, CFA piles, jet grouting and consolidations in general. The rig’s robust base structure allows for the installation of a 16 m (52.5 ft) feed stroke mast, with optional mast extensions increasing the range up to 39 m (128 ft) for jet grouting or equipping the rig with the rod carousel. These features allow for drilling to a considerable depth with single passage or by means of semi-automatic rod loading. The MC 30 can utilize a wide range of rotary heads, hydraulic drifters, double head systems and drilling accessories which are suitable for rotary or rotary-percussive drilling and can be equipped with hydraulic proportional servo-assisted controls or with a radio control.

    Ladda ner PDF
  • Ladda ner PDF

    MC 30 TX

    The MC 30 TX is a tunneling machine, designed for sub-horizontal consolidation works in tunnels using forepoling, jet grouting, cement grout injection. Due to the integrated mast rotation and positioning system, this machine covers a work radius from 2,250 mm to 5650 mm (with 5° mast inclination) with 6,950 mm maximum height. The innovative design of this machine also allows for it to be converted into a standard hydraulic drill rig for ground engineering works (micropiles, anchors,jet grouting). The MC 30 TX also includes as a standard feature the innovative Comacchio radio control system, which electronically manages all machine functions. The machine also features a touch screen PLC unit for the control and safety limitations of the mast positions, including software capable of storing information regarding the location of holes on the tunnel crown and automatically re-positioning the mast on the borehole .

    Ladda ner PDF
  • Ladda ner PDF

    MC 40

    The MC 40 is a high performance hydraulic drilling rig covering a wide range of civil engineering works such as micropiles, CFA / FDP piles, jet grouting and consolidations in general. Due to the robust base structure and pantograph articulation, the rig utilizes a 16 m (52.5 ft) feed stroke mast, with optional mast extensions increasing the length up to 40 m (131 ft) for jet grouting. The CFA / FDP version of the machine allows for the installation of piles up to 16 m (52.5 ft) deep, which can be increased to 20 m (65.6 ft) with the use of an extension. The MC 40 can be equipped with hydraulic proportional servo-assisted controls or with the innovative Comacchio radio control system, which manages all machine functions. Like all Comacchio rigs, the MC 40 can be customized according to specific needs of the customer.

    Ladda ner PDF
  • Ladda ner PDF

    MC 6

    The MC 6 is a hydraulic drilling rig designed for the execution of ground engineering works in confined or low overhead spaces and difficult access jobsites, including inside buildings, basements and small tunnels.

    Ladda ner PDF
  • Ladda ner PDF

    MC 8

    The MC 8 is an extremely versatile and powerful small/medium size hydraulic drilling rig, designed for civil engineering works such as micropiles, anchors, jet grouting and consolidations in general.

    Ladda ner PDF
  • Ladda ner PDF

    MP 600

    The MP 600 is a mono piston mud pump which can be used as drilling pump for pumping of water and Bentonite mixtures or as an injector for pumping cement mixtures.

    Ladda ner PDF
  • Ladda ner PDF

    MTU

    The MTU is a compact unit for the treatment and pumping of the bentonite mud particularly suitable to perform drilling for the installation of borehole heat exchangers.

    Ladda ner PDF
  • Ladda ner PDF

    PC 64-75

    The PC 64-75 is an Automatic Dynamic Penetrometer installed on rubber tracks suitable for soil sampling, SPT (Standard Penetration Test) and DPS (Dynamic Probing Standard). The compact size and ease of use make the PC 64-75 an optimal instrument for geotechnical testing and environmental analysis.

    Ladda ner PDF
  • Ladda ner PDF

    SP Pump

    Ladda ner PDF